IS-DBRSAP Series

Round straight aluminum 6061 alloy, extruded pole shaft. Heat treated to produce a T6 temper. Ground lug welded inside hand hole opposite side of the Pole Extrusion. Direct Burial poles can be ordered with optional coupling (specify height), optional hand hole (specify height), or optional Slot for conduit ingress and egress (specify height). When poles are ordered with a three-way combination of Coupling, Hand Hole and Ground Lug, then the Ground Lug is positioned at 90 degrees to the Hand Hole and the Coupling is opposite the Hand Hole. When the pole is ordered with Hand Hole only, the Ground Lug is at 180 to the Hand Hole.

Height Above Grade
10’ – 24’
Finish
All poles are treated with sand blast media for a near white finish, power
blasted with 100 psi prior to powder coat application. Poles are pre-heated
then electrostatically applied polyester powder coat with a 3 to 5 mil
thickness for maximum adherence.
Marine Grade Finish
All poles are washed through a 5-stage cleaning system with a deionized
rinse, a 3 to 5 mils zinc rich durable polyester primer powder coat, followed by a 3 to 5 mils super durable polyester powder coat finish.